The house is a two-storey building with a basement and an attic. Due to the location on the slope formed by natural relief, the house has separate entrances from two levels. The area of the plot is 1124 sq. M. The basement includes a utility room, a ventilation room, a laundry, drying and ironing room, a storeroom with a separate room for storing weapons, a sauna with a rest room, two workshop rooms and a separate room for staff with their own kitchen and bathroom , gym. The height of the basement is 2.95 m. Separate exits to the street have a rest room and a workshop. On the first floor, in addition to the premises of the entrance group, there is a spacious living room with a fireplace, a cozy kitchen-dining room, a library room with a bathroom, a kitchen in the kitchen and a cloakroom at the entrance. The height of the rooms on the ground floor is 3.00m. On the second floor there are two bedrooms, one of which has a separate dressing room and a bathroom, two children's rooms, a playroom and a dressing room. Next to the bedroom and children's rooms are two separate bathrooms. The height of the second floor is 2.90 m. The attic floor is an open two-level space of 158 sq. M., Behind which walls in the under-roof space there are collector rooms and a house air-conditioning system. The garage building of 150 square meters, designed for three cars as well as the house, is located on a natural slope and has two floors. The entrance for cars is provided on the first floor from the side of Finland street. A separate entrance to the ground floor is located on the opposite side. The basement includes two functional areas. The first zone is a boiler room, the second is a residential part consisting of one room with a kitchen and a bathroom. FINISHES OF THE HOUSE Exterior The exterior walls of both the house and the garage are made of ceramic TERCA Milano (Belgium) in combination with natural stone. Entrance doors - solid oak. Windows and stained-glass windows with double-glazed windows. Garage doors - lifting sections Hӧrmann 3m and 6m wide. Roof - flexible tile CertainTeed Grand Manor (USA). Internal In the technical rooms and premises of the bathrooms the walls are tiled with ceramic tiles, on the floors - granite tiles. In the living rooms, decorative plaster is made on the walls, on the floors there is a massive oak plank, the ceilings are painted gypsum plasterboards of different levels. The staircase is faced with oak steps. The handrails and balusters are also made of oak. All internal doors are wood-plywood. Accomplishment Coiled lawns are laid on the sand base with a plastic geogrid (able to support the weight of the car) Perimeter fenced with a wooden fence height of 3 meters painted 4 times (Penatex ultra). The fence is fixed to metal poles 100/100 mm. The foundation of the fence is metal piles (diameter 89 L3 meters). Sliding gates with electric drives CAME are installed. The main thoroughfares and platforms are laid with natural sandstone 60 mm thick on the reinforced cement base. Drainage and storm sewage systems with heating are also provided. On the site are planted shrubs. Alpine hill with mountain spruce. CONSTRUCTION SOLUTIONS The foundations are made in the form of a monolithic reinforced concrete slab with the thickness of 300 mm for concrete preparation. The external and internal walls of the basement floor are monolithic reinforced concrete with the thickness of 200 mm, the first, second and mansard floors are brick. Overlapping - monolithic reinforced concrete with a thickness of 200 mm. Roofing is a wooden truss system. BUILDING MATERIALS: • Concrete preparation - concrete B10W4F50; • base plate, walls and basement overlapping - concrete В25W8F75, reinforcement of A500С class, under the base of the foundation, a roll-up waterproofing was installed with the establishment on the ends of the slab and the basement walls; • Vertical load-bearing structures (external and internal walls of the building) and partitions are made of solid ceramic bricks produced by the Ryabovsky ceramic goods factory M250. The thickness of the bearing walls is 250 mm, the partitions are 120 mm. • Exterior walls are insulated with Rockwool mineral wool slabs. The Butts facade is 150mm thick. • Overlapping monolithic reinforced concrete with a thickness of 200 mm from concrete B25 and reinforcement A500C. • Staircase monolithic reinforced concrete of concrete B25 and reinforcement A500C. • Roof is a wooden truss system with a mineral wool insulation between the rafter feet. The thickness of the insulation on the height of the rafters is 200 mm.